Different types of Unique Containers
-
Internal Hinge
Instead of a removable cap, these stashers have an internal hinged locking mechanism. The addition of a magnet can automatically close and reset the lock of the case.
-
Keyed Cap
The cap of this stasher features a key shaped protrusion that prevents the cap’s removal until it is rotated 90 degrees. This stasher uses two neodymium magnets to prevent the lid from rotating when not in use.
-
Magnet Cap
These stashers use four neodymium magnets to keep the cap attached to the body. Two studs help keep the cap from shifting if bumped from the side.
-
Magnet Latch
A slight evolution from the “Sliding Latch” a larger cap now holds a neodymium magnet keeping the latch secured instead of relying on friction.
-
Sliding Latch
Utilizing friction between the a track and tab, this stasher is 100% PLA and has a very small envelope.
-
Quarter Turn Cap
Easier to print than a threaded cap, this latching mechanism uses a hemisphere that travels down a groove. Then, the entire cap rotates 90 degrees, preventing its removal. A small bump in the groove lets the user know if the cap has been rotated to the “locked” position.
-
Screw Threads Cap
A very simple and compact design for cylindrical Stashers. What the lack in being modular they make up for with a smaller envelope.
-
All in 1 Ash tray
The last ash tray you will ever need. It holds both a clipper and a bic. It also has two pockets that can hold a cigarillo, a cigarette, or a hand rolled cigarette.
-
Powder Press
This 3 piece tool uses a built in funnel to press powder into a puck. Plug the bottom with the stumpy end, fill the central tube with powder, and press for 15 seconds!
-
Treads
Printed as one piece, these tank like treads always align themselves inside the rest of the print.
-
Groove and Magnet Latch
Using six neodymium magnets to keep the cap locked to the body, this ball and groove design does a phenomenal job keeping cases locked
-
Gear Box
These one of a kind boxes have a gear mechanism that opens the lid as you push a small arm down. Their size ranges from holding Q-Tips to holding a quart sized mason jar.
-
Collapsible Dab Station
Description goes here -
Desktop Dab Station
Description goes here
Welcome to my page! I make personalized containers, storage boxes, and all sorts of accessories for all your smoking needs. I love customizations and making your order one of a kind. Give me some ideas, set some parameters and lets see what we can come up with!
All of my designs are mine and mine alone. The stasher has been my core selling point for the better half of a decade. They have evolved to encompass all types of smokable items. Recently, I expanded to smoker accessories such as custom ash trays with glass scrapers and lighter storage, powder presses, and dab station organizers!
The material I use is known as PLA or polylactic acid, a type of vegan thermoplastic that melts at 200 degrees Celsius but is non flamable. I have held a stasher over a lit candle for over a minute and it did not combust. I then let it sit in the wax next to the flame for a good five minutes and it only turned a little brown and waxy. I have stepped on my stashers and they have not broken; however, I would not recommend driving a car over them or smashing them with a sledgehammer. They are purely from getting from Point A to Point B with your smokable not being squished in your pocket.